Taidacent M328 Color Screen Version Graphic Display Transistor Tester LCR Meter Resistance Inductance Capacitance Meter Digital (Blue)

Product parameters: Supported languages: Simplified Chinese, Traditional Chinese, English (any language can be switched) Appearance size: 70mm*135mm*24mm Power supply: DC9V (you need to bring your own 9V laminated battery 6F22) Weight: 0.128kg (excluding battery) Simple instructions: 1, 2, 3 pin free connection, automatic identification type, automatic detection of pin sequence, graphic display, automatic measurement parameters. Full fool operation Test range description: Transistor range: 2 or less (including 2) PN junction transistors, do not have other internal resistance. Resistance measurement 0.5Ω-50MΩ Inductance measurement 0.01mH-20H Capacitance measurement 25pf - 100000uF Important note: All capacitors must be discharged before testing. Vloss is the meaning of loss and attenuation. The larger the value, the worse the performance of the capacitor, and the closer to scrapping Impedance. The smaller the value, the better the performance of the capacitor To switch between other languages, follow the steps below 1. Press the TEST power button after installing the 9V battery 2. Long press the TEST button after the boot LOGO appears 3. Keep pressing the TEST button until the language selection page appears 4. After the language interface appears, let go, press the TEST button to select the language

• 1: One-button measurement operation, the power is automatically turned off by the delay. The shutdown current is only 20nA and supports battery operation.
• 2: Automatic detection of PNP and NPN bipolar transistors, N, P-channel MOSFETs, JFET FETs, diodes, dual diodes, thyristors, resistors, capacitors, inductors. The pin definition is automatically detected.
• 3: Measure the current amplification factor (B) of the bipolar transistor and the conduction voltage (Uf) of the emitter junction. Darlington transistors can be identified by high threshold voltages and high current amplification factors.
• 4: The protection diode inside the bipolar transistor and MOSFET can be detected and displayed on the screen.
• 5: Measure the threshold voltage and gate capacitance of the MOSFET.